About RTF Colors and Doors
Arkansas Wood Doors uses only the highest quality double refined Medium Density Fiberboard (MDF) to meet all of your custom manufacturing needs. Unless otherwise noted, the standard backing is white, Thermo-Fused Melamine. We have a total of 65 RTF colors available and we are always adding more!
Certain RTF colors are available with Matching-Back; please refer to the RTF colors for availability. Also, upon request, doors can be bored in order to receive hinges. Please note that additional charges will be applied for Matching-Back and drilled doors.
A Foil Match Chart will be available upon request according to foil manufacturer’s recommendations. A downloadable, and printable, version has been provided at the bottom of the page for your convenience.
Our products should be kept in a controlled environment and away from high heat and sunlight. Mild soap and water, mild kitchen and glass cleaning products, or denatured alcohol are best to use for cleaning purposes. Avoid harsh cleaners and abrasives. DO NOT USE ACETONE.
Hard Rock Maple
Black High Gloss
Noce D’ Autore
Solid Rain Cloud
White High Gloss
Aluma Blue Gloss
Aluma Gray Gloss
Aluma Red Gloss
Can I Order parts other than with a white back?
Yes, you can order with match back, or also raw (1 side or 2 sides). Additional charges may apply.
Is there a minimum required?
- minimum width per part is 1.5″
- minimum height for drawers with inside profile is 6″
- 1 square foot minimum per part
- minimum charge per order
Is there a maximum per part?
Parts longer than 96″ cannot be produced.
In which woodgrain direction are the parts pressed?
- Vertical for doors
- Horizontal for drawers – unless otherwise specified
- Sizes are always width x height