| DESCRIPTION: |
Working cap.: X-Axis = 98.43" and Y-axis = 44.88",
Z-axis = 7.87"; positioning by ball screw, speed on
X-axis = 1,392 IPM, Y-axis 1,392 IPM and Z-axis =
456 IPM, all by Brushless AC Servo Drives.
Equipped with: (10) Independent vertical boring
spindles forming a T-configuration with (4) spindles
on the Y-axis and (6) spindles on the X-axis. A total
of (4) horizontal spindles for boring on all four
edges of the panel, (1 + 1) in the X-axis and (2) are
paralleled with the Y-axis (1 in ea. direction) all are
driven by a 3 HP motor;
(6) adjustable panel supports 35.43" long each with
(2) vacuum cups and (4) panel lifting rails for
positioning of heavy parts.
Options included: (1) 9 HP Electrospindle with
"HSK" tool holder inverter driven 1,500 - 24,000
RPM, RH and LH rotation selected through program,
7-position "STC" automatic tool changer, (1) 3 HP -
5,000 RPM grooving saw in the X-axis with 160 mm
dia. blade cap; worktable set up for (2) independent
working areas with (8) rear stops, (4) lateral stops
and (1) central stop for mirror-image operation.
Separate control cabinet with: "DELL PC" Controller,
"XILOG Plus" machine operating software, 15"
color monitor, alphanumeric keyboard, Pentium
Micropressor, 10 Gig harddrive, 3-1/2" disk drive
and RS-232 serial port, ASPAN CAD/CAM offline
software for design work, compatible with DXF.
drawing files, Drill Mate, Cabinet Ware and Cabinet
Vision.
Includes: Voltage stabilizer, Centralized Lubrication
system and BECKER 40 cmb/Hr vacuum pump.g.
Purchased from dealer demo sale in 2004 and used
apprx 10 hours per week. Machine is in Very Good
Condition. New one will run over $100k+
|
|
